One of the main factors impacting our decision is reliability. Most of the roofing contractors either never returned our calls or set an appointment while never showing or calling back. Then came the companies bent on putting together a skeleton bid. When asked to fill in some of the missing pieces they quickly joined their fellow roofers in the tradition of not calling back. Fair enough, this process finally yielded two main choices.
The industry standard for shingle removal is a shingle-ripping bar, utensil that most folks don’t have lying around the garage. If you don’t have one, you can do it with a square nosed shovel, but it takes a little technique.
Once you hire a company for your roofing Fresno requirements, it is an excellent idea to ask them to check the insulation while they are at it. There are some contractors who include this as part of their service, however, others do not. It is better to be made aware of leaks and other complications before they become really big problems. That way, you can have them sorted out and avoid dealing with them at a later stage, which is never any fun. Keep these tips in mind and you will feel a lot more knowledgeable when you approach a contractor for your roofing needs.
Install the panel or roofing companies shingle you have purchased across the previous roof. Check with the company to see if this is possible (at most of the time it is).
In the same way water runs along the valleys between two mountains, water runs along the valleys on your roof peaks. Valleys generally receive the highest concentration of water flowing through them, therefore installing them correctly is extremely important!
Some area local building codes require the installation of Drip Edge and Rake Edge and other building codes do not. Check with your local city building offices to find out. In Alberta for example, the Building Code does not require the installation of Drip edge or Rake edge. Therefore many new homes and/or low budget roof systems do not have drip edge installed in order roofing contractors to allow for more affordable roof prices. We recommend however that Drip edge and Rake edge be installed on every Roof System, no exceptions.
First of all, if you are not fully comfortable with ladders and heights, get the roof professionally inspected. Hospital bills are a lot more expensive than a professional roof inspection. In many cases you may not need to actually go on the roof. It can be inspected from the roof edge with the ladder and possibly a pair of binoculars.
For those who are afraid of heights, roofing may not be the best project to tackle. However, even those who have no problem getting up on a latter should take heed of safety hazards. When the proper safety precautions are taken, then there is less chance of getting hurt. For example, when everyone working on the roof is wearing safety glasses and a hard hat, they are keeping themselves protected from unexpected hazards like falling pieces of wood or nails falling through the air. In addition, roofers should properly brace themselves in order to prevent slipping and falling off the structure.